Skip to main content

VRSF Intercooler 5in Stepped FMIC Upgrade for 2007-13 N54 BMW 135i/335i [E82/E90/E92] N54FMIC-5-S

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$449.00 - $479.00
(No reviews yet) Write a Review
SKU:
VRSF-FMIC-5instep-N54-135i-335i-ng

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$49.00 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

VRSF Intercooler Upgrade for 2007-11 BMW 135i/335i/is N54/N55 [E82/E90/E92]

The VRSF 7"" FMIC was designed to be one of the best performing direct bolt on intercoolers available on the market. The VRSF intercooler features 3D CAD designed cast aluminum end tanks for improved flow over sheet metal end tanks & durability, and is manufactured with a custom bar & plate intercooler core with custom fin pack designed to exact specifications developed by VRSF over the past 7 years for the EVO/DSM Platforms with great success.

VRSF Intercooler for E90 E92 E82 135i 335i Installed View 2

 

Features:
  • Increases HP & TQ by Reducing Air Charge Temperature
  • Helps Prevent Heat Soak
  • Includes Tabs for Mounting Factory Fan Shroud
  • Additional Mounting Hardware Included for Added Support
  • Includes All Couplers & T-Bolt Clamps needed for install
  • 3D CAD Designed Cast Aluminum End Tanks for Durability & Dependability
  • Bar & Plate Intercooler Core W/Custom Fin Pack Design

    5in STEPPED Core Dimensions: 20in x 5.7in x 5in (ETA 8/25/2014)

     
  • VRSF Lifetime Warranty against defects and fitment
Applications:
  • 2007-11 BMW 335i [E90/E92]
  • 2008-11 BMW 135i N54/N55 & 1M [E82]
     

NOTE:
The 5"" stepped core unit usually does not require trimming of the black plastic shroud, however some minimal trimming is needed on select models.

The 7"" core unit requires trimming the black plastic shroud behind the bumper for installation, however the bumper does not need to be trimmed on either model. Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience.

VRSF Intercooler for E90 E92 E82 135i 335i View 4
5in Core

VRSF Intercooler for E90 E92 E82 135i 335i View 2

Included Custom Couplers & Stainless T-Bolt Clamps

IMPORTANT NOTE:
Depending on your year you could either have a Long CP/Short Lower, or a Short CP/Long Lower. 2006 through early 2009 N54 cars use the configuration it comes with stock, late 2009-13 N54 cars will need the Longer pipe.

 

VRSF offers Front Mount Intercooler Upgrades in two configurations - a 5in stepped core design, or a 7in oversize intercooler. VRSF's upgraded front mount intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak - which is a common problem with the factory intercooler. This results in a more power and increased reliability, with the added benefit of reducing the potential for pre-detonation & knock.

Theses intercoolers also feature tabs that allow use of the factory fan shroud and includes an additional set of mounting hardware for extra support. VRSF also includes all of the custom molded couplers and stainless steel t-bolt clamps needed for installation.

  VRSF Intercooler for E90 E92 E82 135i 335i View 4

5in Stepped Core



NOTE:
The 5"" stepped core unit usually does not require trimming of the black plastic shroud, however some minimal trimming is needed on select models.
Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience.

 

sean-rho-e92-modbargains-cotm-august-16

sean-rho-e92-modbargains-cotm-august-10

sean-rho-e92-modbargains-cotm-august-4

If you have any questions about this VRSF N54 Front Mount Intercooler Upgrade please give us a call at 714-582-3330

Mod Category:
Performance
Mod Category:
Intake
Mod Category:
Cooling
Mod Subcategory:
Intercooler