Questions? Call Mod Experts at 714-582-3330
Mon-Fri: 8am - 6pm / Sat: 8am - 5pm
Shopping cart (0): $0.00
Be the first to review this product
Increase throttle response and decreases turbo lag with the VRSF chargepipe for your 135i/335i/335is. The VRSF chargepipe is currently offered in two configurations. Our aluminum chargepipe features a CNC billet aluminum OEM throttle body flange and is finished in powdercoated black. Our aluminum version retains the OEM c-clip & utilizes a larger diameter o-ring in order to provide a better seal over the stock o-ring. We also offer the chargepipe with a Tial or HKS bov flange as well as a N55 setup. A plugged meth bung is included for those who are currently using meth or interested in using meth in the future.
Note: Competition use only. Not CARB approved..
Email to a Friend
The 5" stepped core unit usually does
not require trimming of the black plastic shroud, however some
minimal trimming is needed on select models.
The 7" core unit requires trimming
the black plastic shroud behind the bumper for installation,
however the bumper does not need to be trimmed on either model.
Each VRSF intercooler is hand finished and pressure tested to
ensure a high quality, leak free experience.
Couplers & Stainless T-Bolt Clamps
Depending on your year you could either have a
Long CP/Short Lower, or a Short CP/Long Lower. 2006 through early 2009
N54 cars use the configuration it comes with stock, late 2009-13 N54
cars will need the Longer pipe.
VRSF offers Front Mount Intercooler Upgrades in two
configurations - a 5in stepped core design, or a 7in oversize
intercooler. VRSF's upgraded front mount intercoolers allow for higher HP gains, mainly due to their ability to
keep intake temps down while preventing heat soak - which is a common
problem with the factory intercooler. This results in a more power and
increased reliability, with the added benefit of reducing the potential
for pre-detonation & knock.
Theses intercoolers also feature tabs that allow use of the factory fan
shroud and includes an additional set of mounting hardware for extra
support. VRSF also includes all of the custom molded couplers and
stainless steel t-bolt clamps needed for installation.
5in Stepped Core
The 5" stepped core unit usually does not
require trimming of the black plastic shroud, however some minimal
trimming is needed on select models.
intercooler is hand finished and pressure tested to ensure a high
quality, leak free experience.
If you have any questions
about this VRSF N54 Front Mount Intercooler Upgrade please give us a call at
Use spaces to separate tags. Use single quotes (') for phrases.