Can the film be removed without damage?
Lamin-x protective film can be easily removed without damage to the light or
original paint. Upon initial application, the film can be pulled back up and
reapplied numerous times if not installed correctly. The film and adhesive are
forgiving enough for this. Once the film has settled (appx 48-72 hours) the
product is not considered reusable. Upon removal warm the film and lift off
slowly. If there is any additional adhesive left on the lens, simply rub the
adhesive with isoprophyl alcohol.
Why do you sell some films uncut?
Couple of good reasons for this. Sometimes we do not have a precut kit available
for your specific make or model. Examples would be older vehicles or custom
lights or body panels. Applying an uncut sheet is just as easy and more
forgiving. Secondly, uncut sheets do not need to be perfectly aligned to fit
properly. Just cover the desired area and custom trim to fit your specifications
How do I know which bulk size film to purchase?
Measure the surface area where the film is going to be applied. Take into
consideration any bends or compound curves that may need the material to bend
when wrapping. Then choose the most applicable size for your need. Please
contact us if you require a more custom size than what is listed. *Note: A
Tailor's Tape works well when measuring for bulk film.
Are your colored films legal on headlights for street use?
Our colored films may not be legal for street use on primary lighting. An
off-road disclosure is recommended. Please check your state or local laws before
application. Installation of colored Lamin-x Film on your primary lights is done
so at your own risk. None of our films produce a blue or red light when lit.
I just installed the film on my lights. There are still some tiny bubbles and
milkiness underneath as well as creases/ripples on top of the film. What should
Once the film settles any small bubbles/milkiness or application creases will
disappear. Lamin-x is a breathable PVC vinyl film. Tiny air pockets will
evaporate. The creases/ripples caused by application cards or your finger will
smooth out once settled and warmed.
Can I comfortably install the paint protection
Our paint protection kits include complete installation instructions, which
describes the best installation method for each area/piece. We are also
available to verbally assist the customer if any questions or complications
arise. If you do decide not to install yourself, we can attempt to locate
professional installer within your general vicinity.
What's the difference between your film and
Numerous things make our product more appealing than others, such as:
Our films are impact resistant and a softened PVC vinyl film! Most competitor
films are not impact resistant and are a top-coated urethane film, which makes
for a very stiff and very unforgiving film.
Installation errors can be corrected and repaired upon installation.
Lamin-x is breathable for quicker curing and allows for newly applied paint to
Resists yellowing with minor yearly maintenance.
Multiple colors and thicknesses available for multiple uses. Competitors only
have clear films. No colors available.