Ground clearance, ground clearance, ground clearance.
Being able to get over that obstacle can be the difference between
finishing the trail and needing a tow out – and keeping your center of
gravity low will help you keep your jeep shiny-side-up, should you get a
The TeraFlex JK Wrangler 3" Basic Lift Kit allows up to a 35" tire.
This system includes a 3" lift kit, shocks, front swaybar disconnects,
rear swaybar links, rear trackbar bracket, bumpstops and all necessary
hardware. This kit will allow you to run up to a 35" tire (aftermarket
wheels with 4.5" backspacing or less are required). Fits all JK
Wranglers including Rubicon and Unlimited.
Exhaust spacers are needed for all 2012 model
using Teraflex suspension kits with 3 or more inches of lift. The
spacers are installed between the driver and passenger head pipe flanges
and the flanges of the cross pipe, which moves the exhaust cross pipe
rearward. This prevents contact between the front driveshaft and the
exhaust cross pipe during suspension down travel.
The 2.5 inch suspension kit will also need the spacers for the
next few months. The long-term plan is to shorten the shocks on the 2.5
inch kit by .3 inches in order to prevent drive shaft droop onto the
stock exhaust without spacers, but until this change in the shocks is
implemented, the spacers will be needed. Click
here to check out spacers.
2. For Proper Alignment Front Lower adjustable Flexarms required.
For proper Rear Pinion Angle adjustment, we
upper rear Flexarms for 4 door Wranglers. For 2 door models,
upper and lower adjustable arms are required.
These Flexarms greatly improve stability at freeway speeds. Contact a
Modification Expert (714) 582-3330 for information and pricing.
Each Set Includes:
Front Sway Bar Disconnects
Rear Swaybar Links
Rear Trackbar Bracket
All Needed Hardware
Interested in Buying a
TeraFlex Suspension Lift Kit for your Jeep? Call 714-582-3330
to speak to a Modification