BMW Parts
Audi Parts
VW Parts
Mini Parts
Porsche Parts
Pontiac Parts
Chevrolet Parts
Ford Parts
Cadillac Parts
Infiniti Parts
Nissan Parts
Hyundai Parts
Subaru Parts
Scion Parts
Jeep Parts
KW Suspension
Forgestar Wheels
Alufelgen Wheels
Avant Garde Wheels
VMR Wheels
Audi/VW Replica Wheels
aFe Intake
Injen Intakes
Remus Exhaust
Rogue Engineering


Left menu space
Left right-line Left space

StopTech Stainless Steel Brake Lines Audi TT Mk1


Quick Overview


Stoptech Stainless Steel Brake Lines

Are you looking to take your car to the next level? Are you sick of your stock brakes' slow reaction time to the pedal? Replacing your stock brake lines with stainless steel lines is one affordable way to improve your car's braking capability drastically. Stainless steel lines give you the most from your braking system--whether your brakes are bone stock or modified. There's no downside to upgrading to a quality set of DOT-approved stainless steel lines.

StopTech stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation. StopTech Stainless Steel Brake Lines are 100% DOT compliant and can withstand pressures of 4500 PSI. StopTech brake lines consist of a Teflon inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is resistant to expansion while under pressure and will not degrade from being exposed to brake fluid.


  • Firmer pedal feel
  • Shorter stopping distance through shortened "reaction time"
  • More precise brake modulation
  • Includes all necessary hardware for a safe, proper installation
  • Plastic strain relief devices are provided to reinforce the end fittings
  • Pressure tested up to 4500 psi
  • StopTech is a registered brake line manufactureer with the approval of the United States Department of Transportation
  • Sportstop stainless steel lines comply with TUV and FMVSS 106 safety standards



StopTech Stainless Steel Brake Lines are designed as direct replacement parts for stock brake lines. The replacement lines typically follow the same routing as the stock lines. While the design is tolerant of slight modifications to the intended vehicle, any excessive lowering or raising of the vehicle may make the lines unsuitable for use on that particular car, truck, or SUV. Also, the lines include provisions for routing attachments on the stock suspension, such as brackets on the strut. If an aftermarket suspension is on the vehicle, the stock mounting points may not be on those components

Most Popular

Right right-line