Skip to main content

StopTech Stainless Steel Brake Lines Audi B7 RS4

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$89.95 - $182.90
(No reviews yet) Write a Review
SKU:
STECH_SSLINES_RS4_Km

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$10.00 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

Stoptech Stainless Steel Brake Lines

Are you looking to take your car to the next level? Are you sick of your stock brakes' slow reaction time to the pedal? Replacing your stock brake lines with stainless steel lines is one affordable way to improve your car's braking capability drastically. Stainless steel lines give you the most from your braking system--whether your brakes are bone stock or modified. There's no downside to upgrading to a quality set of DOT-approved stainless steel lines.

StopTech stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation. StopTech Stainless Steel Brake Lines are 100% DOT compliant and can withstand pressures of 4500 PSI. StopTech brake lines consist of a Teflon inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is resistant to expansion while under pressure and will not degrade from being exposed to brake fluid.

Benefits

  • Firmer pedal feel
  • Shorter stopping distance through shortened ""reaction time""
  • More precise brake modulation
  • Includes all necessary hardware for a safe, proper installation
  • Plastic strain relief devices are provided to reinforce the end fittings
  • Pressure tested up to 4500 psi
  • StopTech is a registered brake line manufactureer with the approval of the United States Department of Transportation
  • Sportstop stainless steel lines comply with TUV and FMVSS 106 safety standards

 

 

 
Disclaimer
StopTech Stainless Steel Brake Lines are designed as direct replacement parts for stock brake lines. The replacement lines typically follow the same routing as the stock lines. While the design is tolerant of slight modifications to the intended vehicle, any excessive lowering or raising of the vehicle may make the lines unsuitable for use on that particular car, truck, or SUV. Also, the lines include provisions for routing attachments on the stock suspension, such as brackets on the strut. If an aftermarket suspension is on the vehicle, the stock mounting points may not be on those components
Mod Category:
Brakes
Mod Subcategory:
Brake Lines