Rogue Engineering's Transmission Mounts are the perfect way to help stabilize
your transmission and isolate vibration from your vehicles drivetrain to the
What is a transmission mount?
Transmission mounts are required to succeed in several tasks in your BMW, but
they are not quite suitable for those who actually drive their vehicles.
Unfortunately, these transmission mounts are parts that are frequently
The transmission mount is designed to:
- Help stabilize the transmission under vehicle load allowing the shifter
to engage into gear properly
- Isolate vibration from the drivetrain to the chassis
Under engine load, the transmission can shift left and right slightly.
The shifting gets worse when the car is being driven through turns. The
unwanted movement may potentially cause the driver to miss shift, a costly
error, which will always be considered driver error.
Solutions to a Potential Problem
There are several BMW factory mounts that can improve this situation;
however, they do not fit all cars and only offer the most minimum benefits.
There are race-type mounts that stabilizes the transmission so much that you can
feel every last vibration. There are even aftermarket mounts designed with
reinforcements to make mounts even more stiff. Some companies go as far as
selling solid aluminum mounts, for the ultimate enthusiasts.
Rogue Engineering wanted to create their own transmission mounts produced,
but they also wanted the mounts to be compatible with street use. With
their designs and engineering, they wanted to guarantee the driver that there
would not be compromises in performance or no extras to buy--just a mount
engineered to do what they wanted without unnecessary add-ons.
These transmission mounts are made from neoprene rubber, with a completely
different shape than the factory mount. The hourglass shape of your
vehicle's factory transmission mount is not the most suitable part for
stabilizing the transmission. By changing the shape of the mount into a
cylindrical shape of the Rogue Engineering mount, it reduces deflection
Rogue Engineering has designed this product to minimize unwanted transmission
movement while dampening vibrations. There are no additional adapters,
mounts, cups, or braces that are required for RE's mounts. To remove even
MORE shifting from the transmission, you have to go to the root of the
problem--the factory mount. Although there is a motor mount available, BMW
Motorsport motor mounts (the ones available), can cost $500 or more!
A Simple, Affordable, Complete Package
The RE Transmission Mounts can be purchased as a pair and come with Grade 8
Zinc plated hardware. Unique from other aftermarket mounts, the mounting
plate and studs of their mounts have been Cadmium-plated to prevent any sort of
- All E34
- All E36 including the M3
- All E46 including the M3
- All Z3s including the M Roadster/M Coupe
- All Z8s
- All E39 including the M5
- All Z4s including the M Roadster/M Coupe
Please note that transmission mounts are NOT required/necessary for BMWs with