The Mishimoto Race
Edition Intercooler is an upgraded replacement for
your OEM intercooler. Designed as a universal fit, you'll need couplers
to mate up to your OEM charge pipes but this high quality intercooler is
impossible to beat for the price and its effictiveness.
While it requires some
custom fitting, this universal-fit replacement
intercooler eliminates the undersized Front Mount Intercooler and the enhanced air-charge cooling
offered by the larger intercooler will allow your turbocharged car to make
consistent power, pull after pull.
Mishimoto J-Line FMIC with OPTIONAL CM Buildz Custom
Brackets For Direct Fit-Install on Fiesta ST
Mishimoto J-Line FMIC with DIY Brackets on Fiesta ST
This is the largest
intercooler core available for the Fiesta ST. This allows your car to run more reliably because of
lower operating temperatures that are consistent throughout all driving
situations. And with its TIG welded construction, this intercooler is
bulletproof and will last for the life of your car. This is
direct fit for Fiesta ST, it's a
close-to-direct fit and will happily
bolt up to your Fiesta ST with very minimal effort and additional
hardware specified. If you're not afraid of a little DIY engineering,
are building a racecar or are on an extreme budget,
this is the ideal
solution for you. If you're looking for perfect fitment and
direct-bolt-on, this isn't it, and may not be the right intercooler for
you. And again, if you're going to have a professional install it for
you, it is going to cost significantly more to install than any of the
direct fit intercoolers.
Intercooler core size makes all the difference, and the J-line front
mount intercooler is a near direct-fit for the 2014+ Ford Fiesta ST.
Take a look at the improvements:
Stock Fiesta ST IC
27.5" x 5.25" x 2"
Mishimoto J-Line IC
22" x 7.2" x 3.75"
over OEM Fiesta ST IC
over Cobb IC
This is a bar and plate style J Line
intercooler and comes in your choice of Polished or
Black, with Mishimoto logo on only one side to suit your tastes.
So if you're ready to order a Mishimoto
J-Line Intercooler, give ModBargains a call at 714-582-3330 and talk to
our Modification Experts to get the aftermarket parts that you've always
Hyundai Genesis Coupe 2.0T 2010-12
Ford Fiesta ST 2014+
THIS IS NOT A DIRECT FIT. SOME MINOR WORK IS NECESSARY
To Fit this to your 2014+ Fiesta ST you will also need:
(2) 2.5in 90* Silicon Couplers
(4) 6x 3in T-Bolt Clamps
(1) CMBuildz Direct Fit J-Line Brackets for Fiesta ST*
(2) 2.5in Aluminum Joiner Coupling (hard)
These items are not included and sold separately.
For a complete kit for Genesis Coupe that includes all chargepipes and
necessary couplers, click here.
See Mishimoto's full engineering report with
tons of statistics! Click this to Download a PDF Version
- Efficient cooling
- Massive Intercooler Core
- Durable enough to last the life of your car
- Due to High Capacity core,
J-Line is Significantly Heavier than OEM
- Constructed from aircraft-quality aluminum
- Precision TIG welded
- Bar Plate Core
- 4mm Thick Tank Walls
- M12x1.25 Threading
- 2.5in Inlet/Outlet
- Rated for up to 100psi
- 22x7.2x3.75in Core
- Includes Mishimoto lifetime warranty
Photo by BIFF
Optional 2.5in 90* Silicon Couplers
Silicon 90* 2.5in Couplers from Mishimoto are also available to
make your installation easier.
Mishimoto Information About this FMIC
Now Available: CMBuildz Custom Direct-Bolt On
J-Line FMIC Mounting Brackets for Fiesta ST
We now offer these custom-build brackets to make
installation of the J-Line FMIC easier. These custom manufactured
brackets are manufactured in .104 thick cold-rolled steel, CNC stamped
then professionally bent and tig-welded before powdercoating to ensure a
long-lasting, durable part, and these brackets mean that there's no
cutting of the factory bumper or the OEM air dam, allowing your
Mishimoto FMIC to bolt right up. However, some users felt fitment was
better with slight trimming to the inner lip of the bumper for best fit,
but is not mandatory.
While the OEM air dam is reused completely intact, the lower 3x 8mm
bolts that secure the air dam are not used.
FMIC Installed without Cutting
Cut Bumper Sections Highlighted In Red (if desired)
Interested in getting the Mishimoto J-Line Race Edition
Intercooler? Give ModBargains a call at