FREQUENTLY ASKED QUESTIONS:
What is the difference between 20mm and 40mm clear film?
20 mm - Strong, perfectly invisible protection for lights and lenses. Keep your
lights looking new for years and years.No more yellow, hazy lights from sand
blasting and rocks chips. Very flexible and pliable for very rounded/curved
Adhesive backed for easy and very forgiving application to any surface. Great
heat dissipation properties for those high heat/intensity lighting. Handles up
to 300-degree temps.
40 mm - Our thickest and strongest film yet. 1/16th thick! Perfectly clear,
invisible protection for lights and lenses. Keep your lights looking new for
years and years. No more yellow, hazy lights from sand blasting and rocks chips.
Adhesive backed for easy and very forgiving application to any surface.
Excellent protection for flat and lower temperature lenses. Handles up to
Can the film be removed without damage?
Lamin-x film can be easily removed without damage to the light or original
paint. Upon initial application, the film can be pulled back up and reapplied
numerous times if not installed correctly. The film and adhesive is forgiving
enough for this. Once the film is settled (appx 48-72 hours) the product is not
considered to be reusable. Upon removal warm the film and lift off slowly.
Are your colored films legal on headlights for street use?
Our colored films may not be legal for street use on primary lighting. An
off-road disclosure is recommended. Please check your state or local laws before
application. Installation of colored Lamin-x Films on your primary lights is
done so at your own peril. None of our films produce a blue or red light when
I just installed the film on my lights. There are still some tiny bubbles and
milkiness underneath and creases/ripples on top of the film. What should I do?
Once the film settles any small bubbles/milkiness or application creases will
disappear. Lamin-x is a breathable PVC vinyl film. Tiny air pockets will
evaporate. The creases/ripples caused by application cards or your finger will
smooth out once settled and warmed.
What's the difference between your film and your competitors?
Numerous things make our product more appealing than others, such as:
- Our films are impact resistant and a softened PVC vinyl film. Most competitor
films are not impact resistant and have a top-coated urethane film.
- Installation errors can be corrected and repaired upon installation.
- Lamin-x is breathable for quicker curing and allows for newly applied paint to
- Resists yellowing with minor yearly maintenance.
- Multiple colors and thicknesses available for multiple uses.
- Competitors only have clear films. No colors available.