Skip to main content

No Longer Available - K&N 57 Series FIPK Ford Ranger Intake

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$1.00
(No reviews yet) Write a Review
SKU:
KN_57series_Ford_Ranger_MW

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

A K&N 57 Series FIPK Ford Ranger Intake will give your truck more horsepower and torque throughout the entire RPM range. A 57 Series intake replaces your stock intake and restrictive intake housing, and allows your engine to breathe easier. Apart from performance gains you will also see and increase in fuel economy, and a change in your engine's tone as well as a deeper exhaust note. The intake adds to the overall look and sound of your car. With the intake you will no longer need to waste your money on paper air filters for your Ranger. This is because the filter that comes with the intake is washable, and makes buying paper air filters a thing of the past. With K&N filters, when the filter gets dirty simply wash it down and your ready to go. A K&N 57 Series FIPK Ford Ranger Intake is for anyone who is serious about adding horsepower and torque to their Ranger, as well as; receiving better fuel economy, and adding a sense of personalization to your truck.

Benefits

  • More horsepower and torque from your engine
  • Increase in gas mileage
  • Custom look under your Ranger's hood
  • Deepens engine and exhaust tone
  • Reusable filter. Don't buy paper filters ever again
  • Lasts up to 100,000 miles between cleanings

K&N 57 Series FIPK Ford Ranger Intake

57-2527 pictured

Dyno Charts

(57-2561) 2004 Ford Ranger 4.0L - 13.45 Horsepower Gain

(57-2527) 1998 Ford Ranger 4.0L - 3.25 Horsepower Gain

(57-2554) 2002 Ford Ranger 3.0L - 9 Horsepower Gain

(57-2560) 2004 Ford Ranger 3.0L - 10 Horsepower Gain

Specifications

Intake Fitments Model Estimated Horsepower Gain Replacement Filter Weight length Width Height
2004-2005 Ford Ranger 4.0L V6 57-2561 13.45 Hp @ 5129 RPM RU-4990 8.3 Lbs. 21 in. 12.25 in. 12.38 in.
2001-2003 Ford Ranger 4.0L V6 57-2529-1 6.88 Hp @ 5243 RPM RF-1048 8.4 Lbs. 21 in. 12.25 in. 12.38 in.
1997-2000 Ford Ranger 4.0L V6 57-2527 3.25 Hp @ 3969 RPM RF-1048 8.4 Lbs. 23 in. 14.25 in. 12.13 in.
2004-2005 Ford Ranger 3.0L V6 57-2560 10.03 Hp @ 4921 RPM RX-4860 8.7 Lbs. 23 in. 14.25 in. 12.13 in.
2002-2003 Ford Ranger 3.0L V6 57-2554 9.38 Hp @ 4848 RPM RF-1037 8.5 Lbs. 21 in. 12.25 in. 12.38 in.
1998-2001 Ford Ranger 3.0L V6 57-2533 5.55 Hp @ 4721 RPM RF-4730 10 Lbs. 21 in. 12.25 in. 12.38 in.
1998-2001 Ford Ranger 2.5L L4 57-2540 6.56 Hp @ 5000 RPM RF-1037 6.9 Lbs. 21 in. 12.25 in. 12.38 in.

Installation

  • Installation usually takes less than 90 minutes
  • Doesn't require and special tools
  • Can be installed with only one person

57-2561 Install Guide

57-2529-1 Install Guide

57-2527 Install Guide

57-2560 Install Guide

57-2554 Install Guide

57-2533 Install Guide

57-2540 Install Guide

K&N 57 Series FIPK Ford Ranger Intake

57-2540 pictured

Mod Category:
Intake