Successfully widen your BMW 3
Series' stance without purchasing a complete new set of wheels simply by adding
a set of H&R Wheel Spacers to your ride. This simple modification can produce
big results in the areas of stability, handling, and most importantly
appearance. The H&R 3 Series Wheel Spacers for your E90, E92, E46, E36,
E91, or E93 are extremely lightweight as they are constructed from aluminum and
magnesium alloy which also allows them
to be virtually indestructible. Improve your 3 Series' handling or get that look
you're going for with the proven H&R BMW 3 Series Wheel Spacers.
Please note that we do not accept returns of used or installed spacers. If they
have been installed on your vehicle, they cannot be returned. NO EXCEPTIONS. H&R
spacers do not cause vibrations, unless they are installed incorrectly or there
is another problem with the vehicle.
H&R 3 Series Spacer Benefits
- Up to 70% lighter
than competitor spacers
- Improve appearance without
buying new wheels
- Improves handling by widening
- Anodized for
tough and durable finish
- Hub centric for accuracy and no
- 100% made in Germany, AND TUV
- ISO9001 approved
Applications shown below
will fit all variations including xi models, wagons, and
- 2007-2012 BMW
- 1999-2006 BMW E46
- 1992-1999 BMW E36
Available Spacers and Sizing
*See below for an explanation
H&R Wheel Spacer Types
This spacer is fitted between the
wheel and hub, using longer wheel bolts (ordered separately).
Please check type of bolt head (taper or round and diameter) and
shaft length before ordering (see
chart below). All of the DR
systems require longer wheel bolts.
This spacer is fitted to the hub
with special wheel bolts and has new threaded holes for existing
wheel bolts. All DRA H&R 3 Series Wheel
Spacers come with the necessary wheel bolts that you will use in
conjunction with your stock bolts.
Which Spacers Are Right For Me?