These H&R Springs for your new Audi R8 provide your R8 with a lower
stance to improve handling and appearance without compromising ride
quality. Most importantly the R8 H&R Sport Springs are designed to work with your
stock shocks - a direct replacement for your current suspension
replacing your stock suspension with the R8 H&R Sport Springs you can
expect a lower stance in the front and rear.
Successfully lower your R8 with a proven H&R suspension, the
H&R Sport Springs.
Audi R8 H&R
Sport Springs Featuresresresuresresresuresresresresres
- Compatible with OEM shocks
Improved stance and appearance for your R8
- 100% made in Germany
- Renown H&R high quality construction
- ISO9001 approved
- Improved handling
About Lowering Springs
lowering springs like the H&R Sport Springs are commonly used to lower the ride height and to
reduce body roll. This is also often done when upgrading to a larger
wheel and tire package to minimize unsightly wheel gap. When trying to decide which lowering springs are right for you, your goal should not be to drop down the car as far as possible. In many cases, overly
lowering your R8 may actually be illegal for road use and cause
it to perform worse than it did stock. Ideally using springs to lower
your R8 are best done between 1" and 2", any lower and you would be
better suited going with a coilover setup.
Approx. Front Drop
Approx. Rear Drop
V8 & V10 Model.
R8Talk Forum Member :
Installation for the Audi R8 H&R Sport Springs is
classified as moderate hard. You will need standard tools to disassemble your
suspension, in addition to a spring compressor. Professional installation is
highly recommended for this product.