BMW Parts
Audi Parts
VW Parts
Mini Parts
Porsche Parts
Pontiac Parts
Chevrolet Parts
Ford Parts
Cadillac Parts
Infiniti Parts
Nissan Parts
Hyundai Parts
Subaru Parts
Scion Parts
Jeep Parts
KW Suspension
Forgestar Wheels
Alufelgen Wheels
Avant Garde Wheels
VMR Wheels
Audi/VW Replica Wheels
aFe Intake
Injen Intakes
Remus Exhaust
Rogue Engineering


Left menu space
Left right-line Left space

*Evolution Racewerks Sports Oil Cooler for 2007-13 BMW 135i/335i [E82/E90/E92/E93] BM-COOL002


Quick Overview

Evolution Racewerks Sports Oil Cooler for 2007-13 BMW 135i/335i (E82/E90/E92/E93) Evolution Racewerks Sports Oil Cooler for 2007-13 BMW 135i/335i [E82/E90/E92/E93] BM-COOL002

Sku # : ER-Oil-Cooler-N54-N55-BF-BM
Specify Finish
Oil Cooler Shrouding Kit
Late Model Conversion Kit
Evolution Racewerks Sports Series Oil Cooler Key Benefits:
  • Reduces the high oil temperatures that the N54 and N55 engine produces which helps reduce oil breakdown, improving your car's longevity.
  • Large 9"x8"x2" (11"x8"x2" with end tanks) Oil Coolers.  Factory stock oil cooler 8.75"x4.75"x1"
  • Over 350% larger capacity than the factory oil cooler!!!
  • Sports Oil Cooler has a total of 144 cubic inches of core!  Factory oil cooler has 41 cubic inches.
  • Enclosed box with venting louvers - protects oil coolers from road debris without sacrificing airflow!
  • High Quality Goodrich AN Fittings in Black Anodize - NO China made fittings used here.
  • High End Goodrich Nylon Braided Oil Lines - much better than Stainless Steel braided Oil Lines
  • Optional Carbon Fiber or Aluminum Shrouding to direct airflow through the oil coolers for improved efficiency.
  • Includes all hardware needed to install.  No need to go hunting for hardware to finish the installation.
  • Developed under the harsh racing conditions on Evolution Racewerks' 135i Race Car.
  • Limited Lifetime Warranty.


  • 2006-13 BMW 335i [E90/E92/E93]
  • 2007-13 BMW 135i [E82]

After 3 years of development, they're finally ready. Introducing Evolution Racewerks Sports Series Oil Cooler System! It's well known that the N54 and N55 engines runs very hot.  Turbos that build a lot of heat and a small radiator play into why this engine runs so hot.  A quick look at your gauge cluster on your dash after a few minutes of "spirited" driving, you'll notice oil temperatures over 250 degrees.  Considering that most cars don't even exceed 230 degrees tells you quite a bit.  As the oil reaches that temperature oil starts to lose viscosity and break down. Increasing the size and efficiency of your oil cooler will not only increase your engines life span but also giving you more power!

Sports Series Oil Cooler

Basic Kits comes in a Black Finish

The 135i/335i comes from the factory with a small oil cooler with a core size of 8.75"x4.75"x1" (222mmx121mmx26mm) which comes out to 41 cubic inches of core.  The Sports Series Oil Cooler system features a large 11"x8"x2" (280mmx203mmx51mm) oil cooler with a core size of 9"x8"x2" (229mmx203mmx51mm).  The Sports Series Oil Cooler comes out to 144 cubic inches  of core which is 3.5 times larger than the factory unit each! 

The Sports Series Oil Cooler mounts to its own box enclosure.  Louvers on the backside of the box enclosure ensures airflow through the oil cooler while protecting the oil cooler from road debris, especially debris kicked up from the front tires.  During initial testing, Evolution Racewerks' box enclosure had a big window (open hole) in the back for airflow.  However, throughout the race season, it took so much abuse from rocks, tire and other debris kicked up from the front tires that Evolution Racewerks had to replace the oil coolers on Evolution Racewerks' Time Attack 135i.  Thus, instead of a big hole for airflow to flow through, Evolution Racewerks used louvers instead to protect the back side of the oil cooler.  This effectively solved the issue without any affect on performance.  Oil temperatures as well as oil temperature deltas stayed the same.

Everything needed to install is included with the kits.  No low quality, cheap fittings and lines made overseas used here.  High quality Goodrich anodized black AN fittings and high end Goodrich Nylon Braided Lines are used throughout the kit.  These high end Goodrich Nylon Braided lines are the new thing to use for oil lines as they have many advantages and no disadvantages (other than higher price) than traditional stainless steel braided lines.  The main advantage is that they are lightweight.  Nylon is considerably lighter than stainless steel.  The second advantage is that Nylon Braided Lines are stronger than traditional stainless steel lines.  Third, is that Nylon Braided Lines do not fray.  Stainless steel braided lines will start to fray and those who are familiar with stainless steel braided lines know what we're talking about.  The stainless steel mesh in the lines start to "fray" or break and thus you get poked with the broken ends.  Saves a lot of bloody fingers.  Fourth, they are abrasive resistant.  Since stainless steel lines will act like a saw when it comes in contact with anything and will eventually cut anything it contacts whereas the Nylon braided lines are soft and pretty much won't ever do it.  Fifth, heat resistance.  Nylon Braided lines can withstand more heat and retain the heat inside the line better.  Stainless steel lines tends to release the heat inside the lines, thus when you touch the lines, they tend to be hot.  With all these advantages of the Nylon Braided Lines over stainless steel lines, it's the obvious choice for an Evolution Racewerks product.

Key Options
When the oil cooler box enclosures are used in conjunction with Evolution Racewerks' optional ducting shroud kits, the oil cooler box enclosure actually seals and forces all the airflow captured by the ducting shrouds through the oil cooler cores.  Improves the oil cooler's effectiveness and efficiency.  The ducting shroud kits are available in aluminum or carbon fiber.  These are model and bumper specific so make sure you order the correct shroud kit.
Car Model and Front Bumper Aluminum Shroud Carbon Fiber Shroud
135i with factory front bumper (Msport) Available Coming Soon
135i with BMW Performance front bumper Coming Soon Coming Soon
135i with Evolution Racewerks' FE Widebody front bumper Available Coming Soon
335i with factory front bumper Available Coming Soon
335i with BMW Performance front bumper Available Coming Soon
335i with Mtech front bumper Coming Soon Coming Soon

Conversion Kit For Early 2006 Model 335i With No Factory Oil Cooler:
The very first 335i built in early 2006 did not come from the factory with an oil cooler. With the N54 engine running very hot, BMW quickly realized that this was a big mistake. An oil cooler was quickly added the next year. For those who do not have the factory oil cooler, you will need to convert your car's oil filter housing to a later model year that has external ports for an oil cooler. Evolution Racewerks are now offering these brand new genuine BMW parts to make the conversion. Parts included: Oil Filter Housing, Oil Cooler Thermostat housing, gaskets and hardware.


Late Model Conversion Kit/Oil cooler retrofit kit    
11428642289/11427548032 (1) Oil Filter Housing 2
11427573212 (1) Oil Thermostat Housing 2
11427542983 (3) Torx Screw for Thermostat 2
17222245358 (2) O-Ring for Oil Line Adapter 2
51647154546 (1) Cooler Holder Bracket 2
17217567089 (2) Metal Bushing for Cooler Bracket 2
17217567088 (2) Rubber Grommet for Bushing 2


Upsell Products

Right right-line