|
aFe has done it again
with their all NEW aFe 135i/335i N55 Stage 2 Cold Air Intake. With
their huge success with the 135i/335i N54 intake it is no surprise aFe
has come out with an intake for the N55 135i/335i so quickly.
Power
Once again aFe has out done themselves
with this cold air intake. With an astonishing increase of 17
max horsepower, 23lbs. x ft. torque and out-flowing the factory
intake by 44%.
Construction
This aFe 135i/335i N55 E90/E92
& E93 intake features a heat-insulating molded plastic tube that
replaces the stock intake tract. Which directs increased air
flow with improved volumetric efficiency for maximum performance.
The one-piece heat shield requires little or no assembly and the
filter is constructed with 100% polyurethane for long life and
multiple cleaning cycles. On top of that this system includes a
durable 16 gauge, powder-coated heat shield and includes a
washable/reusable conical Pro 5R air filter for maximum flow.
NOTE: Only fits the 2011 N55 BMW
aFe 135i/335i N55 Stage 2 Cold Air Intake w/
Pro-dry S |
aFe 135i/335i N55 Stage 2 Cold Air Intake w/
Pro-5R |
If you have any
question about this NEW aFe 135i/335i N55 Cold Air Intake Please give us
a call at 714-582-3330
Features/Benefits
- 17 max
horsepower
- 23lbs. x ft.
torque
- Out-flowed the factory intake
by 44%
- Includes a durable 16 gauge,
powder-coated heat shield
- Features a washable/reusable
conical Pro 5R air filter
- Features a heat-insulating
molded plastic tube
- One-piece
heat shield requires little or no assembly
- Filter is constructed with 100%
polyurethane
Application Guide
|
Vehicle |
Pro-5R |
Pro-dry S |
|
2011-2012 335i N55 (E90/E92/E93) |
54-11912 |
51-11912 |
|
2011-2012 135i N55 (E82/E88) |
54-11912 |
51-11912 |
Filter Types
AFE Pro Dry
50% air flow over stock (This would be like comparing a panel filter to
OEM panel)
99.2% filtration
AFE Pro 5R (oiled)
75% air flow over stock (This would be like comparing a panel filter to
OEM panel)
98.6% filtration
Performance Gains
The AFE filter
intake system increases airflow 44% over stock allowing for a nearly
un-restricted airflow, maximizing power gains. The dyno proven gains
show an increase of 17 horsepower and 23 Ft/lbs. of
torque at the rear wheels.
Installation
- Can usually be installed in
under 60 minutes
- Uses factory mounting points
- No special tools required
- No cutting, or drilling
required
If you have any
question about this NEW aFe 135i335i N55 Cold Air Intake Please give us
a call at 714-582-3330
About AFE Filters
AFE filters are
constructed from 100% poly-urethane which makes them very durable, and
resistant to high temperatures and chemicals. The construction of the
pleats in the filter is deeper than that of any other filter, this
provides for an increased
flow and prevents a greater amount of dust
from reaching your engine.
-
Durable
construction
- Deep pleats for
increased filtration
-
Washable/re-useable
aFe 135i/335i N55 Stage 2 Cold Air Intake w/
Pro-dry S
aFe 135i/335i N55 Stage 2 Cold Air Intake
DYNO
If
you have any question about this aFe 135i/335i N55 Cold Air Intake
Please give us a call at 714-582-3330
If you have any question about this aFe 135i/335i N55 Cold Air Intake
Please give us a call at 714-582-3330
If you have any question about this aFe 135i/335i N55 Cold Air Intake
Please give us a call at 714-582-3330 |
