Improve the front end appearance
of your B8 S4 with the newly released Stvbek Front Aero Spoiler.
The Stvbek Front Aero Spoiler is available in FRP (Fiber reinforced plastic) or
2x2 carbon fiber both guaranteed to make the front of your Audi look more
aggressive. The Aero Front Lip attaches to your stock front bumper via included
hardware and 3M double sided tape (not included).
NOTE: Like all Carbon Fiber
and FRP products on the market, this product must be test fitted &
prepped before installing it. Often, slight modifications are required
such as trimming, sanding, filing, or smoothing the surface in order to
get best fitment and appearance. This is NOT an OEM product, fitment
will NOT always be perfect straight out of the box. We recommend having
this product installed by a company that has experience working with
AFTERMARKET body kit pieces, not a standard collision repair center that
only works on insurance claims. Images below show an accurate
representation of THIS PRODUCT, properly installed by a professional
installer. We also install this product at our own installation facility
in southern California.
My first impressions are that the
manufacturing quality of the splitter is very, very good. The part
fits perfect, and the finish was a very high gloss, with a
consistent and appropriate weave of Carbon Fiber.
The part installed easily, and in less than 10 minutes, the car was
off of the jackstands, and on the road. I need to spend a little
time washing and waxing the car this weekend, and once I do, I'll
take some photos for you.
- Cliff M.
Having dealt with a few manufacturers that make carbon fiber
parts, I'll simply say that all parts are not made of the same build quality,
but the CF lip spoiler from ModBargains/Stvbek is of really good quality. The
part that I received was part of the pre-order process, and when I received it,
I noticed that the fit seems to be precise. I held the part up to the front of
the car, and all contours of the lip fit the contours of the car nicely. Within
a day, I had started the installation, and about 10 minutes after the
installation started, I was done.
The part is now installed and it looks great
- [email protected]
FRP vs. Carbon Fiber
The Stvbek Front Aero Lip is available in
either fiber reinforced plastic (FRP) or 2x2 twill weave carbon fiber.
The FRP version will come primered in matte black, and can either be installed unpainted for
an aggressive two tone look, or paint matched to your vehicle's paint for a
classy appearance. The Carbon Fiber Stvbek Front Aero Lip is finished with a
clear coat to protect against fading and discoloring over time.
Stvbek Front Aero Spoiler Gallery