STaSIS Motor Sport Coilovers Looking for the missing links to your car? Looking for the performance of a race car but don’t want to sacrifice ride comfort on the roads? Upgrading your car’s suspension is a quick way to dramatically improve your car’s handling and cornering attitude.
STaSIS has been known for their success sedan-based endurance racing, especially in the A4. The Motor Sport Suspension kit uses the top-of-the-line Ohlins shock absorbers. These coilovers will not only lower your ride height, but alot more. Professional racing teams put these suspension kits on their cars because they have fully adjustable ride height, rebound, compression, as well as customizable spring rates. Fine tune your car like a race car. If your car sees the track quite a bit, these are the right coilovers for you.
If you are not content with their presets, the ride height adjustment system allows you to adjust to your preference on how high your car sits above the ground as well as change the car's center of gravity. Vehicle ride height adjustability is possible via a threaded shock body and an adjustable spring seat. The threaded sleeve is welded to the actual shock body and then Cadmium coated for added protection against road grime and salts.
In addition to performance, the damping force adjustability allows you to set up the car for greater comfort while driving around town. Adjusting the damping force (or ride stiffness) is possible but only when off the car. Product Features:
Comfortable ride for a car that will see the track only once or twice in its life time
Ride Height Adjustable
Rebound dampening Adjustable when off the car
Lowers the car at least 1"-2" from factory ride height
The kit stiffens the suspension enough just to improve steering response and minimize body roll
*Stasis Engineering pre-sets the ride height adjustment on their kids based on their extensive Research & development to ensure a ride height that allows maximum performance and comfort.
B6 and B7 S4/A4
Usage
Front
Rear
Normal Street
600 lb/in
1000 lb/in
Aggressive Street
700 lb/in
1100 lb/in
Track Setting
800 lb/in
1200 lb/in
Contents of Coilover Kit:
Ohlins Aluminum Body, Adjustable Dampers
Ohlins External Front Adjustable Reservoir
Hyperco Linear Rate Springs
STaSIS Mounting Hardware
UHMW Spring Perch Bearings
For Instructions on how to install this suspension kit on an A4, click the link below
http://www.modbargains.com/images/Products/STaSIS/SuspensionB7B6Install.pdf
