About Rogue Engineering
Rear Shock Mounts
The factory BMW rear shock mounts are generally a little soft, to provide
the most possible acoustically dampening in the vehicle. However, design
precludes them from being stout enough to withstand the rigors of aftermarket
suspension, or even badly damaged roads. A decent sized pothole can send a
perfectly good factory rear shock mount to pop out, making it entirely useless,
therefore requiring a replacement.
BMW's poor design often leads to the failing of
the inner metal sleeve separating from the rubber bushing, causing squeaking, rattling, clunking and deflection
of the rear shock mount.
Rogue Engineering decided to produce a rear shock
machined from 6061-T6 aluminum. Rogue Engineering Rear Shock Mounts are able attain
a more stable, and stiffer platform which to mount the top of the rear shock.
However, rather than use race-only spherical bearings or even overly stiff
urethane bushings, we specify Shore A 65 hardness rubber bushings (approximately
30% stiffer than the factory bushings) to allow for some level of street
comfort. The orientation of the bushings makes it impossible for
the bushings to "pop out" in the manner which the factory style mounts fail.
If you have any
questions about these Rogue Engineering Rear Shock Mounts Please Give us
a call at 714-582-3330
***The
Rogue Engineering Rear Shock Mounts are designed to be used with
standard 10mm rear shocks, but can also be used with 12mm adjustable
race shocks with the use of optional washers.
Rogue Engineering Rear Shock Mount
Application
- All E30, including M3
- All E36, including M3 and 318ti
- All E46, including M3
Rogue Engineering Rear Shock Mount
Set includes:
- Two (2) Rogue Engineering 6061-T6 CNC, Anodized Rear Shock Mounts
- Four (4) Shore A 65 Rubber Bushings
- Two (2) 303 Stainless Steel Bushing
Spacers (to be used with standard 10mm rear shocks)
- Four (4) 303 Stainless Steel Washers
(2 required per mount)
- Four (4) Yellow Zinc plated serrated
lock nuts
- Two (2) Shock Tower Reinforcement
Assemblies (with 10.9 hardware welded)
- Two (2) factory gaskets
(#33-52-1-128-734)
|
Rogue Engineering Rear Shock Mounts |
If you have any
questions about these Rogue Engineering Rear Shock Mounts Please
Give us a call at 714-582-3330
Rogue
Engineering Rear Shock Mount
Installation Animations
If you have any
questions about these Rogue Engineering Rear Shock Mounts Please
Give us a call at 714-582-3330
Rogue Engineering Rear Shock Mounts Installation Video |
