Skip to main content

Rogue Engineering Crank Power Pulleys for 06-13 BMW M3/M5/M6 [E90/E92/E60/E63] Underdrive Pulleys

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$295.00
(No reviews yet) Write a Review
SKU:
Rogue-Engineering-Pulleys-E9X-E60-ER

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$10.00 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

As we know the engine is the heart of your BMW, giving you power when you need it. However that power is hindered by all the accessories it has to run such as the A/C compressor, alternator, power steering pump and water pump. Now there is no getting rid of that, however Rogue Engineering has come out with a way to make it more efficient using these Rogue Engineering Power Pulleys. Rogue Engineering has designed these Power Pulleys to reduce the drag on specific pulleys while allowing others to remain at their same efficiency. This allows your BMW power plant to react more efficiently, giving you more useable power and throttle response.

Rogue Engineering Power Pulleys are machined from 6061-T6 heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

If you have any questions about these Rogue Engineering Power Pulley Kits please give us a call at 714-582-3330

Rogue Engineering Power Pulleys Benefits:

  • Better throttle response
  • More useable power
  • Machined from 6061-T6 heat treated aluminum
  • Coated with a MIL-A-8625 Type III hard coat anodize finish
  • Reduce the drag on specific pulleys

Rogue Engineering Power Pulleys fit the following BMW's:

  • E60 M5 / E63 M6 (PP.S85)
  • E90 / E92 M3 (2008 6-speed only) (PP.S65.V8.A)
  • E90 / E92 M3 (2008 DCT, 2009 6-speed and DCT) (PP.S65.V8.B)

Rogue Engineering Power Pulley Kit Includes:

  • Each Rogue Engineering Power Pulley kit comes complete with installation manual and high quality replacement serpentine belt.

Rogue Engineering Power Pulleys Video

 

 

 

 

 

 

 

 

 

 

Rogue Engineering Power Pulleys

If you have any questions about these Rogue Engineering Power Pulley Kits please give us a call at 714-582-3330

Application Notes

    1. US models only.  Does not apply to European models.  E36 328 models require last 7 digits of VIN in order to supply the correct power steering pulley.  Include VIN at time of checkout.

    2. Any power pulley kit which includes a replacement crank shaft pulley allow for the factory harmonic balancer to remain in place.

    3. E39 M5 tensioner pulley requires minor modification of the factory tensioner bracket for installation.  E39 M5 pulley kit also includes replacement A/C belt.

    4. Includes both A/C and serpentine belts.

    5. E46 M3 RACE pulley kit includes underdriven alternator and crank pulley.  This pulley kit is STRICTLY for dedicated track/race cars (not cars that see street duty).  A/C is no longer used.  This is the same kit used on the 2007 Grand-Am GS Championship Automatic Racing M3s.  The crank pulley has been designed to accept a dry-sump cog.  The STREET and RACE kit use the same size belt.

  • E9X M3 pulley kit includes replacement power steering pulley for 08 DCT and all 09 (6-spd and DCT).  08 6-spd models do not require replacement power steering pulley.  Because of our unique pulley system, all of our E9X M3 pulley kit uses commonly available replacement aftermarket belts.  If you have an NAPA, AutoZone or Pep Boys near you, that means you can have replacement belts immediately!  No emergency weekend calls, no overnight shipping, no outrageous pricing for a custom-made belt!

If you have any questions about these Rogue Engineering Power Pulley Kits please give us a call at 714-582-3330

Mod Category:
Performance
Mod Subcategory:
Pulleys & Belts