Cover the unattractive license plate holes in your front bumper with our
Painted Bumper Plugs. The perfect solution when you
need to remove the front plate for shows or give your BMW a cleaner look, or if
you bought your BMW out of state and you no longer require a front license
plate. Installation is simple and easy as the Bumper Plugs are inserted directly
into the holes and removable with ease, no damage to the painted bumper. All
plugs come in pairs, and must be used in 1/4" to 5/16" holes.
NOTE: The plugs must fit
1/4” to
5/16” holes, nothing larger, nothing smaller
Remember, all paint fades with
age. Fading increases with age and exposure to the elements. The paint on your
new product will be factory fresh and may not match a car with faded paint.
Since all painted products are not actually paint blended and matched for your
specific vehicle, slight variations may occur.
Available BMW Colors
- Alpine White
- Arctic Metallic
- Atlantic Blue
- Barbera Red Metallic
- Barrique Red Metallic
- Bluewater
- Bright Red
- Carbon Black
- Cosmos Black Metallic
- Crimson Red
- Dakar Yellow
- Deep Green Metallic
- Electric Red
|
- Grey Green Metallic
- Imola Red
- Indy Red
- Interlagos Blue
- Japan Red
- Jerez Black
- Jet Black
- Laguna Seca Blue
- LeMans Blue Metallic
- Merlot
- Mineral Silver
- Mineral White
Metallic
- Monaco Blue Metallic
|
- Montego Blue Metallic
- Montreal Blue
- Mystic Blue
- Orient Blue
- Orion Blue Pearl
- Oxford Green Metallic
- Peach Pearl
- Phoenix Yellow Metallic
- Platinum Bronze Metallic
- Platinum Grey Metallic
- Sahara Beige Metallic
- Silver Grey Metallic
- Silverstone Metallic
|
- Space Grey Metallic
- Sparkling Graphite
- Steel Grey Metallic
- Sterling Pearl Grey Metallic
- Stratus Metallic
- Titanium Grey Metallic
- Titanium Silver Metallic
- Topaz Blue
- Black Sapphire Metallic
|
Installation
- Installation can be done by any single person, no special skills are required
- No tools are required
- Estimated installation time is generally less than 5 minutes
About the Painting Process
For quality assurance, each product is finished using a 14-stage proprietary
process, these plugs have an exact factory match to the bumper of your car. Our
paints are combined with adhesive promoters and chip resisting agents to prolong
the life and look of your part. The unique paint process requires over 11 days
to complete. Note that our top quality paints will exactly
match the color of a brand new vehicle painted in that color. On certain colors,
exposure to the sun will slightly change/fade the color of the vehicle,
especially with older vehicles or vehicles in warm climates. In these cases the
paint may not be a 100% match to the color on the car, but will be extremely
close.
How to Find Your Paint Code
Open the hood you will find that on one of the shock towers, probably passenger
side, there will be a black label, on this label will be the color name written
in German along with the paint code number at the bottom.
