|
What is the different between Lamin-x and the cheaper
eBay or products I find?
This is the perfect "You get what you pay for" situation. Those cheap films are
a thin 3 mil sticker type of film. That has a dull "orange-peel" finish, thin
adhesive, no protection, and complete pain to install on any lights that have a
compound curve. Lamin-x is the complete opposite of that cheap stuff. Glossy
finish, forgiving adhesive, protection, and designed to mold around complex
curves. Plus we manufacture our film and create our own patterns. Most people
find that sticker overlay a waste of time and money. Don't be one of them!
Can the film be removed without damage?
Lamin-x protective film can be easily removed without damage to the light or
original paint. Upon initial application, the film can be pulled back up and
reapplied numerous times if not installed correctly. The film and adhesive are
forgiving enough for this. Once the film has settled (appx 48-72 hours), the
product is not considered reusable. Upon removal, warm the film and lift off
slowly. If there is any additional adhesive left on the lens, simply rub the
adhesive with Bug and Tar remover or similar product.
I cannot find a precut kit for my vehicle. What
should I do?
Sometimes, we do not have precut kits available for many older model vehicles or
custom-shaped applications. The best solution for this is a custom fitment of
Universal Covers, which is what the pros prefer. Applying an uncut sheet is just
as easy and more forgiving, as the bulk sheets do not need to be perfectly
aligned to fit properly. Just cover the desired area and custom trim to fit your
specifications and liking.
Are your colored films legal on headlights for street
use?
Our colored films may not be legal for street use of primary lighting. An
off-road disclosure is recommended. Please check your state or local laws before
application. Installation of colored Lamin-x Film on your primary lights is done
so at your own risk.
Recent Install. There are still some tiny bubbles and
milkiness underneath, as well as creases/ripples on top of the film. What should
I do?
Once the film settles, any small bubbles/milkiness or application creases will
disappear. Lamin-x is a breathable PVC vinyl film. Tiny air pockets will
evaporate. The creases/ripples caused by application cards or your finger will
smooth out once settled and warmed.
Can I comfortably install the paint protection
myself?
Due to the size, complexity, and general PITA factor, the complete paint
protection kits are best installed by professionals. But it can be done by those
customers who are very mechanically inclined, patient, and have an extra pair of
hands to help out. Our paint protection kits include installation instructions
and application tools, which describes the best installation method for each
area/piece. We are also available to verbally assist the customer if any
questions or complications arise. If you'd rather, we can attempt to locate
Venture Shield paint protection installer within your general area.
How do I return or exchange an item?
RETURNS AND EXCHANGES:
In the unlikely event that you are not completely satisfied, and all options
have been explored, you can return the product for refund.
Refunds for lighting kits issued in the following manner:
• Unopened – 25% restocking fee
• Opened, but non-installed – 25% restocking fee
• Opened, partially installed – 25% for unused product
• A PICTURE MUST BE PROVIDED OF DAMAGED PARTS
• Shipping is Non-Refundable.
Refunds for paint protection kits issued in the following manner:
• Unopened – 35% restocking fee
• Opened, but non-installed – 35% restocking fee
• Opened, partially installed – 35% for unused product
• A PICTURE MUST BE PROVIDED OF DAMAGED PARTS
• Shipping is Non-Refundable.
Returned parts must be in clean, unused, original condition, packed in the
manufacturers original packaging, and received by Lamin-x Protective Films
within 30 days of receipt of merchandise. No returns 30 days from receipt of
product. No Exceptions. No return will be accepted without proof of purchase of
date of sale. We will inspect all items before a refund is issued. No COD
refunds accepted. No returns will be accepted without prior authorization!
Contact us to receive a return authorization number
When packages appear damaged on arrival, state condition of the container over
your signature on the receipt. If you discover a damaged part after opening the
package, notify the carrier immediately. We provide properly packaged contents
at the time of carrier pickup. Direct claims to the carrier. We package ALL
products at the utmost care.
Where is my order?
Precut kits are not sitting on shelves waiting to be thrown into a box. Your
order is custom made for you when you order it! Because of this process, all
precut kits require a minimum of 3-5 business days to manufacture and ship out.
Please allow at least 2-10 days for delivery of product AFTER the product has
been shipped. Product may be delivered on a Saturday, so take that into
consideration and make arrangements to sign for it when it shows up.Also, we
ship most products via USPS with a tracking number. They are great for
delivering product, but not so great for updating their tracking information.
Their tracking status does not necessarily reflect on the true status of the
order.
|
