Skip to main content

No Longer Available - H&R TRAK+ Spacers Passat Sedan/Wagon (98-up)

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$82.68 - $132.31
(No reviews yet) Write a Review
SKU:
HRSPACERS_VW_3_PR

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$17.00 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

If you've ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel/ tire combo that just barely tucked under the wheel wells, chances are that car was fitted with H&R TRAK+ wheel spacers. TRAK+ wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you've been looking for.

H&R TRAK Wheel Spacers
TRAK+ wheel spacers are made from a proprietary aluminum/magnesium alloy which is not only incredibly strong, but also very light weight (up to 70% lighter than a comparable steel product). TRAK+ wheel spacers are then hard anodized to ensure a tough, durable finish that is resistant to chipping, scratching and oxidation. Hub centric for the highest level of accuracy, TRAK+ wheel spacers are 100% made in Germany under ISO 9001 Quality Assurance standards, and meet the rigid safety criteria of the German TÜV.

Whether you want improved handling, increased safety or simply want your car to make a statement about your individual style, TRAK+ wheel spacers can help you accomplish your goal.

Vehicle Fitment(s)
Passat Sedan/Wagon (98-up)

Bolt Pattern Bolt /
Stud
Center
Bore
Thread Type
5/112 Bolt 57.1 14x1.5

Type

Width

Note

P-N

DR

5mm

3*

10255571

DR

8mm

3*

16255571

DR

10mm

3*, 18*

20255571

DR

12mm

3*, 18*

24255571

DR

15mm

3*

30255571

DR

20mm

3*

40255571

DRA

25mm

5025571

*NOTE 3: All DR-Systems require longer wheel bolts. These must be ordered separately by selecting spacers with wheel bolts above when choosing your spacer size. In addition, please send us your vehicle make and model as well as the brand and type of wheels you are using these with so we can ensure you receive the proper spacers.

*NOTE 18: The 16mm wheel spacers are offered for vehicles on which the center hub is long enough to center the wheel after installation. Alternatively, we offer wheels spacers in 16mm, 20mm, and 24mm - with a centering hub.


DR SERIES
10 - 40 mm track widening

This spacer is fitted between the wheel and hub, using longer wheel bolts (ordered separately). Please check type of bolt head (taper or round and diameter) and shaft length before ordering (see chart below).

DRS SERIES
10 - 40 mm track widening

This spacer is fitted between the wheel and hub, exchanging the existing wheel studs for longer ones. The wheels are then fitted to the hub/spacer with the existing wheel nuts.

DRA SERIES
40 - 60 mm track widening

This spacer is fitted to the hub with special wheel bolts and has new threaded holes for exisiting wheel bolts.

DRM SERIES
40 - 90 mm track widening

This spacer is fitted to the hub with special nuts and it carries new wheel studs for the existing wheel nuts.


Note:
All DRA, DRM and DRS kits come complete with all necessary wheel bolts, studs and nuts. These will be used in connection with the existing parts fitted to the vehicle. DRS kit requires the new studs to be pressed into the hubs of the vehicle.

Mod Category:
Wheels