H&R Sport Springs
for your new F31 328i Touring or 328d Touring (Wagon) provide your car with a lower stance to
improve handling and appearance without compromising ride quality. Most
importantly the F31 H&R Sport Springs are designed to work with your
stock shocks - a direct replacement for your current suspension
replacing your stock suspension with the F31 H&R Sport Springs you can
expect a 1.75in lower stance at the front and 1.4in at the rear..
Successfully lower your 3 series with a proven H&R suspension, the
H&R Sport Springs.
H&R Sport Springs Features
- Compatible with OEM shocks
Improved stance and appearance for your F31
- 100% made in Germany
- Renown H&R high quality construction
- ISO9001 approved
- Improved handling
About Lowering Springs
lowering springs like the H&R Sport Springs are commonly used to lower the ride height and to
reduce body roll. This is also often done when upgrading to a larger
wheel and tire package to minimize unsightly wheel gap. When trying to decide which lowering springs are right for you, your goal should not be to drop down the car as far as possible. In many cases, overly
lowering your F31 may actually be illegal for road use and cause
it to perform worse than it did stock. Ideally using springs to lower
your F31 are best done between 1" and 2", any lower and you would be
better suited going with a coilover setup.
Approx. Front Lowering
Approx. Rear Lowering
Installation for the F31 H&R Sport Springs is
classified as moderate hard. You will need standard tools to disassemble your
suspension, in addition to a spring compressor. Professional installation is
highly recommended for this product.