 |
 |
 |
 |
Product DetailFAQWarranty
| Evolution
Motorsports V-Flow Cold Air Intake |
Looking for
that proven performance boost for your Audi? Evolution
Motorsports proudly announces the release of the highly anticipated
V-flow Air Induction systems for the Audis. Engineered using state of
the art CAD CAM 3D modeling, CNC machining, computer controlled
Superflow air flow testing, rotational molding, injection molding and
countless man hours, these systems represent the apex of air induction
technologies. Additionally, these systems also incorporate a custom
cotton air filter and a 6” injection molded Venturi that acts as a
vacuum for cold-air. All these components work together to create the
most powerful Audi air intake systems on the market today.
|
|
What is an
air intake?
Every vehicle
is equipped with an air intake. There is a world of a difference between
an aftermarket and OEM intake. Aftermarket intakes replaces the OEM
intake by a metal pipe with an air filter at the end. This creates a
performance boost due to its increased air volume intake. Many speculate
the amount of performance benefits that it provides, but depending on
how much the OEM intake restricted air flow the aftermarket will provide
performance enhancement accordingly. There is a debate between cold air
and short ram intakes. Many prefer cold air intakes due to its higher
increase in performance, but this risks the chance of hydro-locking.
Hydro-locking is when the air intake inducts water instead of air
causing the vehicle to shut down, but in horrid cases permanently
destroying the engine. Short ram intakes on the other hand does not
risk the chance of destroying the engine because the intake is within
the engine bay. Many debate the performance benefits for each, but there
is no conclusive data as to which is better. |
|
Benefits
- 10-15 HP and TQ
increase
- Better
gas mileage
-
Increased throttle response
-
Will pay for itself in
time due to improved gas mileage
- Custom
look under your hood
- Audible
Difference from stock air intake
- Easy
installation
|
Fitment
- Audi A6 2.7TT (INTK27TTVF)
|
Kit includes:
- 1 x 2 piece heat shield
- 3 x washers
- 3 x 10mm bolts
- 2 x 13mm bolts
- 2 x 13mm nuts
- 1 x 6” filter
- 1 x 6”venturi w/adapter
|
Installation
Installation
usually takes less than one hour to complete and can be done with a
single person. There are no special tools required to install the intake
and all the clamps and brackets you will need will be supplied with the
kit.
|
|
Warranty Information:
Below you will find some frequently asked questions regarding to our warranty
and any existing warranty on your car....
Q: What will happen to my factory warranty if I add your performance parts?
A: By law, a dealership is not allowed to void a warranty based upon having
aftermarket parts installed on a car. When you add an aftermarket part to the
car, the aftermarket part will void the warranty of ONLY the stock part it is
replacing. What that means is if you add an intake, the only part of the
warranty that should be voided is that of the OEM intake. That is where
consumers need to be sure to choose an aftermarket company that stands behind
their products and offer warrantys on what they sell. Below you will find some
articles written by SEMA regarding this issue.
-Warranty Rights
-Consumer Bill of Rights
Q: What is the warranty on Evolution Motorsports parts?
A: Different parts are going to have different warranty periods, if you have a
question about warranty for a specific part, please contact us at info@evoms.com.
|
|
 |
 |
|
|
|
 |
 |
 |
