Loading...
 
BMW Parts
Audi Parts
VW Parts
Mini Parts
Porsche Parts
Pontiac Parts
Chevrolet Parts
Ford Parts
Cadillac Parts
Infiniti Parts
Nissan Parts
Hyundai Parts
Subaru Parts
Scion Parts
Jeep Parts
KW Suspension
Forgestar Wheels
Alufelgen Wheels
Avant Garde Wheels
VMR Wheels
Audi/VW Replica Wheels
aFe Intake
Injen Intakes
Remus Exhaust
Rogue Engineering

Quote
Quote

Left menu space
Left right-line Left space
New

Centric Posi Quiet Semi Metallic Brake Pads for 2007-09 BMW 3-Series [E92/E93]

$52.99

Quick Overview

Keep your E92/E93's wheels clean with the Centric Posi Quiet Metallic Brake Pads.

Sku # : Centric_PosiQuiet_Metallic_Pads_E92_MW
Front Pads
Rear Pads
Shipping

Upgrade your stock, dusty pads for Posi Quiet Semi Metallic E92/E93 Brake Pads. The number one cause for customer returns are noise and vibration. Centric Parts has recognized these issues and is constantly improving its products to eliminate these issues. Posi Quiet Semi Metallic Brake Pads features either precision cut or shaved backing plates and mechanically attached shims; these small details ensure proper fitment in the caliper and virtually eliminate noise associated with pad vibration. In addition to these features Centric Parts has added a scorching process to all of its Posi Quiet Brake Pads. This additional process forces any impurities out of the friction material and pre-burnishes the pads to greatly accelerate the break-in process.

Benefits
  • Manufactured using same molding process as OEM manufactures
  • Low dust
  • Longest wearing material available
  • Noise free braking
Application Front Rear
2007 E92/E93 328i/328xi 104.10610 104.12670
2008-2009 E92/E93 328i/328xi 104.12600 104.12670
2007-2009 E92/E93 335i/xi/xdrive 104.09180 104.11700

About Scorching
Posi Quiet pads are the only full-line of aftermarket pads that are scorched. This OEM process enhances key friction performance levels. Scorching raises initial cold effectiveness, stabilizes friction levels right out of the box, and provides consistent performance across the entire operating range.

During the scorching phase; each brake pad surface is super-heated to simulate the initial break-in process performed by installation technicians. This additional step removes any uncured bonding agents eliminating the need for initial break-in and reducing noise caused by pad glazing. Scorching thermally conditions the pad material which yields a more consistent and higher friction level right out of the box. Scorching benefits the vehicle owner by promoting a more complete bed-in of new pads, increasing the effective stopping power from the first stop.

 

Upsell Products

Right right-line