The
factory 135i, 335i, 535i, and Z4 35i ECU comes detuned from the factory and the
full potential of the N54 twin turbo engine is inaccessible. That has all
changed with the introduction of the BMS JB3 processor. The JB3 is the latest
generation of the Juice Box Performance Tuner and it features completely new
microcontroller based hardware, numerous input/output channels, and integrated
safety features. Also, the 1.3 version improvements include crank position for
full 4D engine mapping, air intake temperature for on the fly thermal loading
adjustments, direct solenoid control for precise spike free boost control,
throttle input for factory like drivability, and fuel pressure control for
diagnostic invisibility. Basically, the JB3 provides safe, reliable increase
in horsepower and torque. With over 15 unique maps to choose from (stock
maps to race maps), this is the only performance software you will ever need for
your N54 equipped BMW. Moreover, map changes can be
made while seated in the driving seat! Whether your vehicle has an
intake or is fully modified, the JB3 will adjust to the modification and make
the most out of it. The JB3 is available in either the pinout ($349) or plug and
play version ($579) for easy install. All this and more makes the JB3 the
#1 software choice for the fastest 1 series
and 3 series in the world. When it comes to choosing the best performance
software for your 135i, 335i, 535i, Z4 35i…only settle for the best : BMS JB3.
Benefits
- Gain over 80whp
and 80wtq on pump gas; 180whp and
155wtq with race gas and bolt-ons
- Switch between 10 maps
for every occasion; 15 maps with a modified JB3
- Change between maps
right from the driver's seat
-
Adapts to modifications (downpipes, intercooler, intakes, 100 octane, etc.)
- Invisible to BMW
tuning detection software
- Installs within 30
minutes
- #1 software choice for
the world's fastest 1 Series and 3 Series
Applications
- 2008+ 135i
- 2007+ 335i/xi
- 2009+ Z4 35i
- 2008+ 535i
- 2008+ X6
2.0 Datalogging Cable (optional)
This cable allows the user to data log and change maps on a laptop via USB
connection. This cable can also be used to update your JB3 with new updates and
firmware. To use this cable you must have the 2.0 firmware loaded
on your G3 control box.
Click here for the
latest 2.0 firmware, interface software, and directions.
Click here to see the fastest 335i 1/4 mile time
using the JB3
Click here to see the fastest 135i 1/4 mile time
using the JB3
|
BMS Dual
Cone Intake kit
Looking for that perfect intake with an even more perfect trade off
between aesthetics and performance, form and function? The BMS Dual Cone
Intake kit provides just that; This Dual Cone Intake Kit feature S&B
inverted cone filters with aluminum couplers anodized to match your
engine bay.
|
|
BMS
Dual Cone Intake Kits use S&B inverted cone filters due to their high
quality build, standards, and materials used. S&B goes through the
highest of standards that most other performance intake companies are
scared of, ISO 5011. S&B inverted cone filters use an 8 ply filter for
maximum protection for the engine while still maintaining the highest of
performance demands.
 |
The couplers are sized to match perfectly to the end of the velocity
stack to the inlet of the turbo, this design results in smoother air
flow with less pressure drops then other system on the market.
|
Applications Guide |
| Make |
Model |
Chassis |
year |
|
|
BMW |
1 series 135i |
E82 |
08-10 |
| BMW |
3 series
335i |
E90/91/92/93 |
06-10 |
|
BMW |
5 series 535i |
E60 |
08-10 |
JB3 USB
2.0 6’ Datalogging Cable
This proprietary
USB cable connects the JB3 G3 control box to your laptop, for use with
2.0s new datalogging, tuning, and map loading software. Cable may be
left in engine bay and routed in the window or door when needed for a
simple install. Alternatively it may also be routed behind the ECU in to
the glove box for a clean install and on the fly access. JB3 must be
equipped with a G3 box. Please do not attempt to use a standard
RS232/USB cable with the JB3 as it will not work and may damage the
processor.
This cable is only compatible with JB3 version 2.0. If you have an older
JB3 version you will first need to update your firmware using either the
chip upgrade or board upgrade below. The chip upgrade is for those who
already have a G3 board and the board upgrade is for all others (board
does not have a DB9 connector on the end). The G3 board includes 2.0
firmware preloaded. |
