 |
 |
 |
 |
Product DetailGalleryInstallation/Warranty
Anzo's new line of Halo Style Head
Lights are the top of the line after
market HID projector head light on the market. These Anzo head lights
are a perfect solution to your boring and dull
stock head lights. They are meant to
add style and give you intense lighting
capabilities to any truck or SUV with their enhanced
projector beam. They feature radical
designs and custom one of a kind looks with a price that can
not be beat by any other manufacturer. Anzo makes all of their head
lights with high quality materials that ensure a
water tight seal and a flawless fit and finish.
These halo projector head lights come with everything you need to
install them on your truck or SUV. Every color and design Anzo
makes are all legal and D.O.T approved, and with that variety, it
guarantees that these lights will go perfectly
with your ride.
|
|
Features/Benefits: |
Colors: |
- C.A.D. - Computer
designed for innovative trend setting design
- Head turning one
of a kind design
-
Changes the look of the
vehicle in 30 minutes
- New application
for most makes and models
-
All D.O.T. compliant to
FMVSS-108
- OEM Style
weather tight connections and wire harnesses
- Cover by a 1 year
warranty
- Simply
plug and play
|
Black
 |
Chrome
 |
Applications:
- 2004 - 2008 Ford F-150 Projector
with HALO LED
 |
 |
|
Black w/ Halo
|
|
Chrome w/ Halo
 |
| AnzoUSA™ products are covered, by a
limited one (1) year warranty, to be free of manufacturer’s defects.
However, certain AnzoUSA product categories have warranty policies which
differ from this standard, please contact your representative for
detailed category information. Damage due to improper installation or
road hazards is not covered. Seller and manufacturers’ only obligations
shall be to replace the product proven to be defective. Neither seller
nor manufacturer shall be liable for any injury, loss or damage, direct
or consequential, arising out of the use of or the inability to use the
product. Before using, user shall determine the suitability of the
product for its intended use, and user assumes all risk and liability
what so ever in connection there with. |
Tools Needed:
- 10 mm Socket
- Phillips Head Screw Driver
|
Step 1:
Remove the plastic clip located at the
top of the headlight. Save clip for new headlight assembly. |
|
Step 2:
Pull the shroud out of the way exposing
the two 10 mm bolts. |
Step 3:
Remove the bolts. |
|
Step 4:
Remove the 10 mm bolt located at the top
of the headlight. |
Step 5:
Pull the clip up and pull the taillight
assembly straight out. |
|
Step 6:
Twist and pull the inner turn signal bulb
out of the housing |
Step 7:
Twist and pull the head light bulb out of
the housing. |
Step 8:
Twist and pull the side maker light out
of the headlight housing. |
Step 9:
Disconnect the headlight bulb from the
wire harness. |
Step 10:
Disconnect the inner signal bulb socket
from the wire harness. |
Step 11:
Disconnect the side marker socket from
the wire harness. |
Step 12:
Twist the two red wires together and the
two black wire together from the Anzo headlight assembly. |
Step 13:
Locate the side maker light, pull back
the electric tape exposing the black and brown wire on the stock
harness. |
Step 14:
Splice the red wire from the housing to
the brown wire from the harness. |
Step 15:
Splice the black wire from the housing to
the black wire from the harness. |
Step 16:
Plug the side maker harness to the
socket. |
Step 17:
Plug the inner marker harness to the
socket. |
Step 18:
Plug the headlight bulb harness to the
socket. |
Step 19:
Place the headlight assembly into the
headlight housing. |
Step 20:
Tighten up the three 10 mm bolts that
hold the headlight to the housing. |
Step 21:
Place the plastic clip back in place. |
Make sure all functions are working properly
before driving. |
 |
|
|
 |
 |
|
|
|
 |
 |
 |
