Skip to main content

AEM Air Intake for 2015 Ford Mustang EcoBoost [S550] 21-740C

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$429.99
(No reviews yet) Write a Review
SKU:
AEM_Ford_Mustang_EcoBoost_intake_NG

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$22.00 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

AEM intake systems are possibly one of the most advanced and efficient intakes today.  They are guaranteed and to maximize your A4's ability to breath deeply and perform under any type of extreme conditions. AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks, and include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. AEM creates these intake systems using mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature.
 

AEM Air Intake for 2015 Ford Mustang EcoBoost [S550] 21-740C

Benefits

  • Increase in HP and TQ

  • +12HP @ 3600RPM Gain

  • Better fuel mileage

  • High quality and precision construction

  • Dryflow washable air filter

  • Easy installation

Applications

  • 2015 Ford Mustang EcoBoost 21-740C

Installation Guide

 Color

  • Gunmetal Gray

 

 

AEM pioneered the cold air induction system for sport compact cars in 1994. 

A cold air intake system relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver large power gains. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

Every AEM cold air induction system features high standards of construction and AEM are is confident in their fit and performance that AEM guarantee them for the life of your vehicle. All AEM cold air systems include a lifetime DRYFLOW synthetic air filter and come with a limited lifetime warranty.

AEM Air Intake Boosts 2015 Ford Mustang 2.3L EcoBoost Turbo Horsepower & Torque

AEM is able to boost horsepower, torque and acceleration of 2015 Ford Mustang EcoBoost models
 

By replacing restrictive factory components AEM is able to boost horsepower, torque and acceleration of 2015 Ford Mustang EcoBoost models

For the first time in nearly thirty years, Ford is offering a turbocharged inline-four cylinder engine in the 2015 Ford Mustang EcoBoost. Contrary to most auto makers’ engine line ups, due to an increase in horsepower, torque, and fuel economy, the Ford 2.3L EcoBoost four cylinder engine is an upgrade over the standard 300 horsepower V6. Ford engineers managed to squeeze an impressive 310 horsepower and 320 lb-ft from the 2.3L EcoBoost engine while also earning an EPA estimated 31 highway MPG for the 2015 Ford Mustang. Despite the already impressive power numbers of the 2015 Ford Mustang EcoBoost, owners searching for an extra boost in horsepower, torque, and acceleration can easily do so with the installation of an AEM air intake system.

Ford is offering a turbocharged inline-four cylinder engine in the sixth generation 2015 Ford Mustang EcoBoost
 

For the first time in nearly thirty years, Ford is offering a turbocharged inline-four cylinder engine in the sixth generation 2015 Ford Mustang EcoBoost

Typically, the factory air intake tubing, stock air filter box, and disposable air filter is a significant point of restriction in modern fuel injected cars or trucks. Because of this fact, AEM works to develop cold air intake systems to eliminate restrictive factory intake tubing, sound baffling, and the stock air filter box. By replacing restrictive factory components with a charcoal gray powder coated mandrel bent aluminum air intake tube coupled to an open element AEM Dryflow synthetic air filter and protected by an application specific air filter heat shield, AEM is able to boost horsepower, torque and acceleration of 2015 Ford Mustang 2.3L EcoBoost models.

AEM engineers’ goal during air intake system development is to deliver as much airflow as the engine can use quickly and with the fewest bends possible. The pleated design of an AEM Dryflow air filter, along with the smooth inner surface of an AEM mandrel-bent aluminum air intake tube, helps to reduce turbulent airflow to promote more efficient combustion and increased power. In addition to an increase in airflow and reduced restriction AEM strives to provide cool, dense, air to aid in enhanced performance through improved combustion. The AEM Ford Mustang 2.3L EcoBoost air intake 21-740C includes an application specific powder coated heat shield designed to seal against the Mustang’s hood to help block hot air rising off the exhaust manifold from entering the air filter.

A Dryflow air filter was developed to maximize airflow for the 2015 Ford Mustang intake
 

An oval tapered Dryflow synthetic air filter was developed to maximize airflow for the 2015 Ford Mustang intake

AEM air intake systems undergo in-house dyno testing to provide estimated horsepower and torque gains that can be achieved by installing an AEM cold air intake. Dyno testing of the AEM 2015 Ford Mustang 2.3L EcoBoost air intake showed an estimated increase of 12 horsepower and 17 lb-ft of torque at a commonly used 3,600 RPM to the rear wheels. This is an even more impressive number when you consider that power losses incurred through the drivetrain yielded just 219 of the 310 stock ponies making it to the wheels.

The AEM 2015 Ford Mustang EcoBoost air intake will improve horsepower, torque, and under hood appearance
 

The AEM 2015 Ford Mustang EcoBoost air intake will improve horsepower, torque, and under hood appearance

Increasing performance with an AEM air intake system 21-740C will not put 2015 Ford Mustang 2.3L EcoBoost models at risk. AEM air intake systems and AEM Dryflow air filters are designed and tested to provide high-airflow and increased performance without sacrificing filtration efficiency or engine protection. AEM Dryflow air filters are built with a non-woven synthetic air filter media pleated between coated wire mesh. Non-oiled AEM Dryflow air filters are designed for easy cleaning and durable service without the need for air filter oil. AEM Induction Systems stands behind its products with a Lifetime Limited Warranty and the ability to wash and reuse an AEM Dryflow air filter means it will be the last air filter that 2015 Ford Mustang EcoBoost owners will need to purchase.

If you have any questions about this AEM Cold Air Intake for the Mustang EcoBoost 2.3L Please give us a call at (714) 582-3330
Mod Category:
Intake
Mod Subcategory:
Intakes